GMP for Medical Devices - Online Training Recording

Course No. 21447

header-image

Speakers

Dr. Gerhard Bauer-Lewerenz

Dr. Gerhard Bauer-Lewerenz

Bauer-Lewerenz Consulting

Dr. Heinrich Prinz

Dr. Heinrich Prinz

PDM Consulting

Harald Rentschler

Harald Rentschler

mdc medical devices certification

Jesper Wagner

Jesper Wagner

Niras A/S

Objectives

The aim of the course is to identify similarities and differences between the regulations of the FDA and the European regulations for Medical Devices. The focus will be on
  • Classification Rules and Submission in the USA
  • Certification Procedures
  • Technical Documentation vs  Device History File and Device Master Record
  • Combination Products
  • Design Controls
  • Validation / Qualification
  • Regulatory Audits
  • CAPA and Complaint Handling
A Notified Bodies representative will start the course by explaining the regulatory requirements, especially regarding the new EU Medical Device Regulations.

Background

Since 1996, the requirements for the development, the manufacture and the distribution of medical devices in the USA have been laid down in the revised cGMP regulations for Medical Devices (21 CFR 820, QSR). In the USA, medical devices are regulated by the FDA’s Center for Devices and Radiological Health (CDRH). Inspections  are primarily performed by the FDA.
 
In Europe, three EU directives (90/385/EWG, 93/42/EWG and 98/79/EG) and one amending directives regulate the medical devices industry. In May 2021, the new Medical Device Regulation will come into force. GMP regulations - strictly speaking - are not notified.

Instead, harmonised standards, especially ISO 13485, represent the state-of-the-art in the area of the EU. Inspections are primarily performed by Notified Bodies („New Approach for Product Regulations and Conformity Assessment“).
 
With the revision of the ISO 13485 in 2016 there are also new (“GMP”-) requirements. 
 
Statistical data about deficiencies of medical devices do only exist in the USA because of the Freedom of Information Act. For years now, CAPA/Complaint Handling, insufficient Design Controls, Management Responsibility, Process Controls and Process Validation and Quality Audits have been among the Top 10 deviations.

Target Group

This event has been especially designed for the manufacturers who are subject to the medical device legislation and want to become familiar with the practice-oriented implementation of the legal requirements  in the USA and in Europe.

Technical Details

To participate in an on demand training course or webinar, you do not need any software. The recordings are made available via a streaming server. In general, the recording is provided in MP4 format, which any PC (Microsoft Windows, Apple IOS) or tablet can easily display.

Timing and Duration:
When you register for the on demand Training course or webinar you can decide at what date you want to follow the training course online. For a 1-day training course you will have 2 days in which the stream is available (for 2-day training course 3 days and for a 3-day training course 4 days). Within in this timeframe you can start & stop the stream according to your needs.

In time before the scheduled date (your desired date) you will receive an e-mail from us with a link for direct participation as well as your log-in data.

Please be aware: The recording does not include the Q & A sessions.

Training Course Documentation and Certificate:
The presentation will be made available as PDF-files via download during the online training course. After the successful completion of the online training, you are able to download the certificate of attendance.

Programme

Overview about similarities/differences between Medicinal Products and Medical Devices
  • Regulatory Submission
  • Guidelines
  • Supervision
Certification Procedure under the European MDR
  • Economic Operators
  • Classification of medical devices
  • Selection of certification procedure
  • Certification by Notified Bodies
Differences between EU and FDA Requirements
  • European Requirements
  • FDA Requirements
  • Differences and common interests
Classification and Premarket Submission of Medical Devices in the USA
  • Classification rules in the USA
  • IDE
  • 510k, PMA
  • De novo, HDE
GMP-Related Requirements of EN ISO 13485:2016
  • Role of ISO 13485:2016
  • Documented procedure
  • Key requirements
Technical Documentation vs. DHF/DMR 
  • Content of Technical Documentation
  • Technical Documentation as a linking document between production and quality control
  • Change Management – Retests
  • Content of the DHF
  • Relation to the DMR
  • Link to Technical Documentation
  • Audit and inspection findings
Combination Products 
  • The Guidance for Industry and FDA Current Good Manufacturing Practice for Combination Products –
  • an overview
  • Combination products in the EU – Guidelines and Definitions
  • How to classify the combination product
  • Conformity assessment
  • The consultation procedure
Design Controls 
  • Introduction of regulatory requirements
  • Common aspects/differences regarding the requirements of the ISO 13485 and 21 CFR 820
  • How to implement Design Controls in the whole life cycle process
  • Modern concepts of development of products
  • Audit and inspection findings
Qualification and Validation
  • Regulatory requirements (FDA, Standards, GHTF)
  • Risk assessments
  • Qualification
  • Validation
  • Audit and inspection findings
 
Regulatory Audits under MDR and MDSAP
  • Purpose of the MDSAP
  • DSAP Audtiting Organizatons
  • Focus point on regulatory audits
  • Unannounced audits by Notified Bodies
CAPA/Complaint Handling
  • Regulatory requirements (EU, FDA, Standards, GHTF)
  • Common aspects/differences regarding the requirements of the ISO 13485 and 21 CFR 820
  • New ISO 13485:2016 requirements
  • CAPA – the motor for continuous improvement
  • Monitoring as a subsystem
  • Interface complaint handling /CAPA System
  • Audit and inspection findings
Recording from 21/22 November 2023
Duration of the recording: approx. 9 h 38 min.

stop

This course is part of the GMP Certification Programme "ECA Certified Quality Assurance Manager" Learn more

ECA-Member*: € 1690,-
Regular Fee*: € 1890,-
EU/GMP Inspectorates*: € 945,-
APIC Member Discount*: € 1790,-

(All prices excl. VAT). Important notes on sales tax.

* also payable by credit card
American Express Visa Mastercard

icon
Further dates on-site
Further dates on-site
Not available
icon
Further dates online
Further dates online
Not available

Do you have any questions?

Please contact us:
Tel.: +49 6221 8444-0
E-Mail: info@gmp-compliance.org

Woman with headset

Go back

Testimonials about our courses and conferences

"Great material and speakers" and "Great speakers a lot of experience and sharing"

Felipe Gonzalez, Mucos Emulsionsgesellschaft mbH
Live Online Training - Granulation & Tableting, September 2024

"Nice presentations: easy understanding, quite visual"

Susana Manrique, Boehringer Ingelheim España, S.A,
Live Online Training - Granulation & Tableting, September 2024

“Fantastic course – I really enjoyed the interactive structure & greatly appreciate social activity.”

Anthony Cummins, Sebela Pharmaceuticals, Ireland
GMP Auditor Practice, September 2023

 

“Very well organized, information on point without being overwhelming.”

Eleni Kallinikou, Pharmathen
Live Online Trainng - Pharmaceutical Contracts - Febuary 2024

 

“Good overview of different types of agreements, good to see both the GMP and the legal angle”

Ann Michiels, Johnson&Johnson
Live Online Trainng - Pharmaceutical Contracts, Febuary 2024

 

 

“Well prepared presentations and good presenters. I also like the way of asking questions.”

Alexandra Weidler, Hookipa Biotech GmbH, Austria
Live Online Training – QP Education Course Module A, November 2023