The aim of the course is to identify similarities and differences between the regulations of the FDA and the European regulations for Medical Devices. The focus will be on
Classification Rules and Submission in the USA
Certification Procedures
Technical Documentation vs Device History File and Device Master Record
Combination Products
Design Controls
Validation / Qualification
Regulatory Audits
CAPA and Complaint Handling
A Notified Bodies representative will start the course by explaining the regulatory requirements, especially regarding the new EU Medical Device Regulations.
Background
Since 1996, the requirements for the development, the manufacture and the distribution of medical devices in the USA have been laid down in the revised cGMP regulations for Medical Devices (21 CFR 820, QSR). In the USA, medical devices are regulated by the FDA’s Center for Devices and Radiological Health (CDRH). Inspections are primarily performed by the FDA.
In Europe, three EU directives (90/385/EWG, 93/42/EWG and 98/79/EG) and one amending directives regulate the medical devices industry. In May 2021, the new Medical Device Regulation will come into force. GMP regulations - strictly speaking - are not notified.
Instead, harmonised standards, especially ISO 13485, represent the state-of-the-art in the area of the EU. Inspections are primarily performed by Notified Bodies („New Approach for Product Regulations and Conformity Assessment“).
With the revision of the ISO 13485 in 2016 there are also new (“GMP”-) requirements.
Statistical data about deficiencies of medical devices do only exist in the USA because of the Freedom of Information Act. For years now, CAPA/Complaint Handling, insufficient Design Controls, Management Responsibility, Process Controls and Process Validation and Quality Audits have been among the Top 10 deviations.
Target Group
This event has been especially designed for the manufacturers who are subject to the Medical Device legislation and want to become familiar with the practice-oriented implementation of the legal requirements in the USA and in Europe.
Technical Requirements
We use Webex for our live online training courses and webinars. At www.gmp-compliance.org/training/online-training-technical-information you will find all the information you need to participate in our events and you can check if your system meets the necessary requirements to participate. If the installation of browser extensions is not possible due to your rights in the IT system, please contact your IT department. Webex is a standard nowadays and the necessary installation is fast and easy.
Programme
Overview about Similarities/Differences between Medicinal Products and Medical Devices
Regulatory Submission
Guidelines
Supervision
Certification Procedure under the European MDR
Economic Operators
Classification of medical devices
Selection of certification procedure
Certification by Notified Bodies
Differences between EU and FDA Requirements
European Requirements
FDA Requirements
Differences and common interests
Classification and Premarket Submission of Medical Devices in the USA
Classification rules in the USA
IDE
510k, PMA
De novo, HDE
Q&As
GMP-Related Requirements of EN ISO 13485:2016
Role of ISO 13485:2016
Documented procedure
Key requirements
Technical Documentation vs. DHF/DMR
Content of Technical Documentation
Technical Documentation as a linking document between production and quality control
Change Management – Retests
Content of the DHF
Relation to the DMR
Link to Technical Documentation
Audit and inspection findings
Q&As
Combination Products
Medical devices versus medicinal products – the key differences
The Guidance for Industry and FDA Current Good Manufacturing Practice for Combination Products – an overview
Combination Products in the EU – Guidelines and Definitions
How to define a combination product in the EU and US
Roles of Competent Authorities (CA) and Notified Bodies (NB)
Design Controls
Introduction of regulatory requirements
Common aspects/differences regarding the requirements of the ISO 13485 and 21 CFR 820
New ISO 13485:2016 requirements
How to implement Design Controls in the whole life cycle process
To find alternative dates for this training/webinar or similar events please see the complete list of all events.
For many training courses and webinars, there are also recordings you can order and watch any time. Just take a look at the complete list of all recordings.
Testimonials
