You get an update on isolators for aseptic manufacture and for sterility testing
You get to know the results of recent studies on the validation of isolators
You have the opportunity to discuss your individual questions personally with experts
You can translate the theory directly into practice during 3 workshops at the manufacturing site of SKAN in Allschwil
Each participant takes part in all 3 workshops. The workshops are held at the plant of SKAN AG, partly including operational isolators. This brings the participants as close to daily practice as possible.
Background
The use of isolators is increasing both in sterility testing and in the production of sterile medicinal products, particularly in aseptic manufacture. It ensures a greater microbiological safety of the products, but at the same time requires increased inputs as regards the qualification of these systems and the validation of the production processes.
In 2004, Appendix 1 to the FDA Guidance for Industry "Sterile Drug Products Produced by Aseptic Processing" defined new regulatory requirements on using this technology, as did the PIC/S document PI 014-3 "Isolators used for Aseptic Processing and Sterility Testing“. The new EU GMP Annex 1 from 2022 also deals with isolators in great detail.
Target Group
This GMP Education Course addresses those employees from the pharmaceutical industry and from suppliers for aseptic (toxic) manufacture and for sterility testing involved in the engineering, validation and operation of these systems, especially from the areas
Engineering / Production
Quality Assurance
Qualification/ Validation
Microbiology
The number of participants is limited.
Please understand that, for competitive reasons, not all companies can register their employees for this event.
Date / Venue / Presentations / Certificate
Date Tuesday, 11 November 2025, 09.00 h – 18.00 h CET (Registration and coffee 08.30 h – 09.00 h CET) Wednesday, 12 November 2025, 08.00 h – 16.05 h CET
After the workshops on 12 November 2025 at appr. 16.05 h, a bus shuttle service will bring the participants to the airport, the train stations or the hotel.
The presentations for this event will be available for you to download and print before and after the event. Please note that no printed materials will be handed out on site and that there will not be any opportunity to print the presentations on site.
After the event, you will automatically receive your certificate of participation.
Programme
Regulatory Requirements for Isolators for Aseptic Use
Regulatory bodies
US laws and regulations
European laws and regulations
Guidelines
Basic Isolator definitions
Isolator Application / Projects: From the Conceptual Design to the Validated Equipment incl. Mock-Up Study
Key decisions
What do we need from our customers?
From URS to engineering – technical details and solutions
Process challenges and features
FAT – Installation – Qualification
Purpose of mock-up
What is required before starting a mock-up
How to document a mock-up
What simulations need to be included in the mock-up
Execution of the mock-up itself
Examples for our mock-up to underline the points above
Isolators in Aseptic Manufacturing
Basics of isolator technology
including material transfer systems
Qualification concept
VHP cycle development
Qualification of isolator combined with e-beam: VHP cycle; dosimetry; smoke study
Case Study on Management of Indirect Products Contact Parts in an Isolator
Definition of indirect product contact part
Regulation’s requirement
Example of implementation along the all lifecycle of indirect product contact parts
Bioindicators / Process Development of Isolator Decontamination
Overview of current regulations and standards
Basis and selection of suitable biological indicators as sensor for the inactivation effect
Development and quantification of decontamination cycles
Influence of H2O2 to routine processes
Troubleshooting in Isolator Technology
The place of the isolator in a pharmaceutical process
The influence of critical parameters on the decontamination process
The reliability and reproducibility of biological indicators
The expectations of regulators
Isolators Used for Sterility Testing
Requirements for the isolator
Background of the isolator
Performance Qualification
Qualification of operators
Test for gas-tightness of primary packaging materials
Handling in isolator
Capacity
Testing the tightness of gloves
Microbiological Monitoring
Sample plan
Contamination level
Contamination source
OOS/CAPA (example)
Initial Validation by Media Fill of a Syringe Isolator Filling Line
General Media Fill Design
Line-specific Media Fill Design
Media Fill Failure with Root Cause
Inspection Feedback to Media Fill Design
Workshop Session
Workshop 1: Validation Planning for an Aseptic Isolator
Test master plan (IQ/OQ)
IQ / OQ test protocols
Operational qualification - procedures
Handling of deviations
Performance of Selected Qualification Tests
Basic SOP for testing
Execution of tests
Generate test records
Drawing up the test report
Glove testing
Glove integrity testing
Regulatory Background
Physical methods for glove integrity tests and their boundaries
Microbiological contamination risk
Routine program for glove integrity testing
Workshop 2: Development and Quantification of H2O Decontamination Cycles
Establish the requirements of a decontamination cycle
Design a qualification strategy
Work out the necessary physical and microbiological tests and their chronology
Interpretation of test results and reaction on deviations
Write a transparent qualification report
Workshop including a real isolator system
Workshop 3: Isolators VR Mockup
Isolator Design engineering using Virtual Reality (VR)
Use of real-world objects for physical feedback and position validation (XR experience)
Ergonomic assessment and future manipulation simulation
Workshop 4: Plant tour incl. E-Beam
Design of an Isolator
Construction details
You will take part in all workshops! The workshops will take place at SKAN AG in Allschwil. After the workshops, at appr. 16.05 h, a bus shuttle service will bring the participants to the airport (appr. 16.25 h), the Swiss train station (appr. 16.55 h), the German train station (appr. 17.10 h), or to the hotel.
This training/webinar cannot be booked. Send us your inquiry by using the following contact form.
To find alternative dates for this training/webinar or similar events please see the complete list of all events.
For many training courses and webinars, there are also recordings you can order and watch any time. Just take a look at the complete list of all recordings.
Testimonials
