Sigrid Guhr, AbbVie, Germany
Dr Ulrich Kissel, European QP Association, KisselPharmaConsulting, Germany
Katja Kotter, Vetter Pharma-Fertigung, Germany
Sue Mann, Sue Mann Consultancy, U.K.
Jef van Schuerbeek, Consulting bvba, Belgium
During this Live Online Training Course, specialists will share their expert knowledge about all important GMP aspects in Pharmaceutical Development and Investigational Medicinal Product (IMP) Manufacturing. You will be able to elaborate and discuss both EU and FDA requirements.
Compliance is mandatory. Also in the manufacturing of IMP supplies, compliance with the applicable GMP Guidelines is obligatory. But which GMP requirements are the applicable ones? And do the requirements differ from clinical phase 1 to phase 3? And what is the role of ICH Q8, Q9, Q10 and Q12?
With the third revision of ICH E6 (ICH E6(R3)), the GMP for IMP principles will be expanded to the following: Risk-based approaches should be considered when implementing proportionate measures to ensure GMP and the appropriate shipping and handling of the IMP.
Previously, the WHO already published two new draft documents relating to Development and GMP for IMPs: „Good Practices for Research and Development Facilities“ and „GMP for IMPs“.
In addition, instead of the current EU GMP Annex 13 (Manufacture of IMPs), the Detailed Commission guidelines on GMP for IMPs for human use apply since January 2022. Complex challenges have to be faced and resolved to guarantee high quality products. The safety of the drug and hence also the patient should always be the main focus. Terminated studies or studies without reliable results will lead to extensive extra costs and delays in the whole development and approval process.
This Live Online Training has been designed by the ECA to broaden your knowledge and to consolidate the various GMP aspects which need to be considered in a successful development of a new pharmaceutical product.
This Live Online Training Course has been designed for R&D personnel involved in Pharmaceutical Development, IMP Manufacturing, Quality Control, Quality Assurance, and Regulatory Affairs.
For our webinars, we use Cisco WebEx, one of the leading suppliers of online meetings.
you can check if your System meets the necessary requirements for the participation at a WebEx meeting and at the same time install the necessary plug-in. Please just enter your name and email address for the test. If the installation is not possible because of your rights for the computer system, please contact your IT department. WebEx is a Standard nowadays and the necessary installation is fast and easy.
22 November 2022
Global GMP Requirements from Phase 1 to Scale-up and Transfer
- Global requirements: applicable law, directives, guides and guidelines: what is really required
- A comparison of FDA and European requirements and expectations
IMPs in the Context of ICH Q8-Q10, Q12 and Q14
- How to integrate Quality by Design
- Risk Analysis in pharmaceutical development
- Life cycle concept
The GMP/GDP/GCP Interface
- Pre-requisites for randomisation and blinding
- Site-to-site Transfers
- Shelf life extension
- The QP: where does the responsibility end?
Q&A Session 1
IMP Manufacturing: How much Qualification and Validation is needed?
- Qualification vs. Validation
- What can be found in the regulations
- DQ/IQ/OQ of equipment
- Cleaning validation vs. cleaning verification
- How much process validation is needed?
Cleaning Validation / Verification in Pharmaceutical Development
Change Control for IMPs
- What is required
- What is important
- What are the benefits
- How to implement
Case study / Interactive session 1
Transition of GMP Requirements from Phase 1 to Phase 3 and the Interface to Development Work
- Challenges and Differences
- How to apply phase appropriate GMPs
- Managing a GMP Lifecycle
Q&A Session 2
23 November 2022
Analytical Development (ICH Q14)
- From method development to method validation
- How to deal with genotoxic and other impurities
- Quality control and IMP release
- Analytical Qualification
The Role of the QP in Pharmaceutical Development and IMP Release
- Co-operation with Head of Production and Head of Quality Control
- Confirmation of Compliance, certification and batch release
- Complaints and recalls
Q&A Session 3
How to handle Deviations in an R&D Environment
- Why we need a process for Deviations
- What we need to know
- How to do it
Case study / Interactive session 2
Stability Studies throughout the Development of a new Product
- Different types of products in CT studies (and support)
- APIs and various dosage forms
- Late stage stability strategies
The FDA Pre-Approval Inspection (PAI)
- Involvement of the R&D Department
- What the FDA will look for
- What happens at FDA during and after the PAI
- Responding to FDA after the PAI
Q&A Session 4
24 November 2022
Important Documents in Pharmaceutical Development
- Early documentation
- PSF: style and Content
- Case studies
Case study / Interactive session 3
- Manufacturer‘s understanding of data integrity, needs and benefit
- Regulatory expectations
- Hybrid systems (paper and electronic records) - how to ensure data integrity?
Packaging and Supply of Clinical Trial Materials
- GMP requirements
- Quality control of packaging and labelling
- Handling and sourcing of comparators
- Randomisation and blinding
Q&A Session 5