GMP for Cannabis – what you need to know - Live Online Conference

GMP for Cannabis – what you need to know - Live Online Conference

Course No 19267

Note: All times mentioned are CEST.


This training/webinar cannot be booked. To find alternative dates for this training/webinar or similar events please see the events list by topic.

For many training courses and webinars, there are also recordings you can order and watch any time. You can find these recordings in a list sorted by topic.

Or simply send us your inquiry by using the following contact form.

* also payable by credit card American Express Visa Mastercard

If you have any questions, please contact us:
Tel.: +49 (0)6221 / 84 44 0 E-Mail:


Moran Dvora, BOL Pharma, Israel, ECA Cannabis Working Group
Dr Rainer Gnibl, GMP Inspector, Government of Upper Bavaria, Germany
Dr Andrea Kühn-Hebecker, Concept Heidelberg, Germany, ECA Cannabis Working Group
Rita Prazeres, Clever Leaves, Portugal, ECA Cannabis Working Group
Luis Meirinhos Soares, FORMER GMP / GACP Inspector, Infarmed, Portugal, ECA Cannabis Working Group
Giorgia Tossi, Linnea, Switzerland
Dr Ingrid Walther, Pharma Consulting Walther, Germany, Leader of the ECA Cannabis Working Group
Dr Christian Werz, Federal Office of Public Health(FOPH), Switzerland


Medical cannabis has been permitted for prescription in Germany since 2017, causing a need for producers supplying pharmacists and physicians with the newly legalized drug. In addition, more and more countries around the world are following Germany by introducing programs in order to legalize cannabis for medical use. But what qualifies as medical grade cannabis? And which aspects have to be considered for CBD-Products? This conference will give you an overview of all relevant regulatory and GACP/GMP/GDP requirements and aspects for medical cannabis and CBD-Products.


In March 2017, the national German legislature expanded the options for prescribing medical cannabis products by passing a law amending provisions under the Narcotics Law and other regulations. These products, however, must comply with the relevant requirements laid down under Medicinal and Narcotics Law, including GACP/ GMP and GDP. Therefore, the BfArM (the Federal Institute for Drugs and Medical Devices) has taken over new responsibilities by establishing the Cannabis Agency. This agency is meant to help in ensuring supplies for medical-quality cannabis.

Unlike AGES in Austria, though, where cultivation of medical cannabis has already been established, cannabis will not be cultivated by BfArM itself, but by commissioned companies. Cannabis is not meant to be stored directly at BfArM during any stage of the purchasing, harvesting or distribution process. These steps will be carried out by relevant producers or other commissioned companies (i.e. suppliers, importers, wholesalers). Hence, the agency will manage and monitor the cultivation, harvest, processing, quality assurance, storage, packaging and distribution of cannabis to wholesalers, chemists or manufacturers.

The GMP inspectorates are responsible for issuing manufacturing and import licenses or GMP Certificates. Thus, they will perform inspections at the sites of manufacturers who apply for these certificates and licenses.
In summary:
  • The Cannabis Agency is responsible for ensuring that only medical grade cannabis is supplied,
  • The relevant requirements based on the underlying legal framework (including Pharmacopoeias) and the corresponding GMP, GDP and GACP guidelines must be complied with, and finally
  • Cannabis for medical purposes is also subject to the provisions of the Narcotics Law

Non-EU suppliers, who currently produce according to GPP, will have to implement EU-GMP standards if they want to supply medical cannabis to the EU market. However, since there is currently no harmonized EU standard and no European pharmacopoeial monograph (Ph. Eur.) for medical cannabis and extracts exists, national legislations, guidelines and pharmacopoeial monographs will have to be followed and applied in addition to EU-GMP.

Target Group

This Live Online Conference addresses specific GMP aspects to consider for Growers, Manufacturers, Start-Ups, Suppliers, Importers, Wholesalers, QPs and QA/QC personnel involved in Cannabis production and release. The topics provided are also of interest for GACP/GMP/GDP Inspectors responsible for issuing a GMP certificate or manufacturers/import license.

Technical Requirements

For our Live Online Training Courses and Webinars, we use Cisco WebEx, one of the leading suppliers of online meetings. At you can check if your system meets the necessary requirements for the participation at a WebEx meeting and at the same time install the necessary plug-in. Please just enter your name and email address for the test. If the installation is not possible because
of your rights for the computer system, please contact your IT department. WebEx is a standard nowadays and the necessary installation is fast and easy.


Note: Provisional timetable, the actual schedule may vary depending on the situation.
Programme – 8 June 2022

12.00 – 12.15 h Welcome

12.15 – 12.45 h
  • GMP for Cannabis: setting the scene
12.45 – 13.00 h
Time for Discussion
13.00 – 13.15 h Break
13.15 – 14.45 h
GMP Certification / Challenges and Experiences from current Inspections
  • Authorization, registration & import
  • Which requirements apply?
  • Current issues
14.45 – 15.00 h Break
15.00 – 15.45 h
Transport and Import/Export Requirements
  • Transport and Import/Export requirements
  • Required licenses
  • Exports of GACP grade Cannabis
15.45 – 16.15 h
Time for additional Questions and Discussion
16.15 – 16.30 h Break
16.30 – 17.30 h
Aspects to Consider for CBD (and other Hemp) Products
  • Pharma, food and cosmetic products and requirements
  • How to differentiate between CBD/Cannabis Products for medical use and other CBD (Hemp) Products?
  • Which legal rules apply?
  • Practical examples
17.30 – 18.00 h
Final Discussion Day 1
Programme – 9 June 2022
10.30 – 11.30 h
Legal Foundations for Extemporaneous Preparations containing more than 1% THC in Switzerland
  • Extemporaneous preparations
  • THC & CBD
  • Exceptional licence
11.30 – 12.15 h
The Intersection between GACP and GMP - View on the Inspection of Cannabis GACP and its Relation to GMP
  • When does GACP end and (EU) GMP start?
  • What will be checked during GACP and EU GMP inspections?
  • Observations in inspections
  • Open questions and issues to be solved
12.15 – 12.45 h
Time for additional Questions and Discussion

12.45 – 13.45 h Break

13.45 – 14.45 h
Overview of Pharmacopoeial Monographs (and other Quality Requirements)
  • Europe (Ph. Eur.)
  • Germany (DAB / DAC)
  • Denmark
  • Netherlands
  • France
  • Switzerland (Ph. Helv.)
  • Israel
  • New Zealand (Product Quality Standards Monograph)
  • USA (USP)
14.45 – 15.00 h Time for additional Questions and Discussion

15.00 – 15.15 h Break

15.15 – 16.15 h
Israel Medical Cannabis Regulation
  • The Israeli Medical Cannabis unit and the licensing process
  • Major guidelines: IMC-GAP, IMC-GMP, IMC-GDP, IMC-GSP
  • Differences and similarities: Israel vs. Europe
  • The export process to Europe
  • The import process of medical cannabis to Israel
16.15 – 17.15 h
Experiences – Lessons learned
  • Application of GMP principles to Cannabis:
    • Quality management System (QMS)
    • Facility Design
    • Qualification / Validation: Points to consider
17.15 – 18.00 h
Final Discussion Day 2

Go back

GMP Conferences by Topics