Live Online Training - Cleaning Validation

Live Online Training - Cleaning Validation

Course No 18155

Have a brief look at the training here (link to YouTube).


There is no recording available for this Online Training. Are you interested in participating in an upcoming Live Online Training on this topic? Would you like to get individual advice on our training portfolio? Contact us.

If you have any questions, please contact us:
Tel.: +49 (0)6221 / 84 44 0 E-Mail:


Robert Schwarz, FH Campus Vienna, Austria


Many questions relative to cleaning validation are still open and have to be answered within the companies:
  • What does the cleaning validation concept have to look like to be GMP-compliant and cost-effective?
  • Which risk analyses are applicable to cleaning validation?
  • How helpful can a riboflavin test be?
  • Which maximum value is scientifically acceptable, especially in the field of APIs?
  • Which sampling procedure is appropriate for which process and facility?
  • How can you cut costs by means of bracketing?
  • How are critical areas defined?
  • Is cleaning evaluation the solution for seldom manufactured products?
  • Which microbiological maximum values are valid in the areas of non-sterile dosage forms and APIs?
  • Special aspects of cleaning validation in biotech API plants
These questions will also be discussed with the help of practical examples.


In the manufacture of medicinal products and APIs, the cleaning of facilities and equipment is an important measure to avoid contamination and cross contamination. In compliance with the GMP regulations, cleaning is performed and documented according to the described procedures. In the past, cleaning effectiveness was often monitored only visually. However, residuals of APIs and excipients as well as of detergents are increasingly an issue in inspections and audits. The success of cleaning procedures has to be validated. In addition to the FDA “Guide to Inspection – Validation of Cleaning Validation Processes”, the PIC/S document PI 006 and Annex 15 address cleaning validation in a separate chapter. Moreover, the ICH Guideline Q7 “GMP for APIs” also requires cleaning validation – as well as two guidelines by APIC, the association of European API manufacturers.

A Guideline from EMA on Dedicated Facilities and Exposure Limits for Cleaning Validation and the revised Annex 15 deal now with a PDE (Permitted Daily Exposure) approach

Target Group

This course is directed at staff of R&D, production and quality assurance involved in cleaning validation. It also addresses engineering companies and manufacturer of cleaning devices/equipment interested in learning more about the pharmaceutical industry’s viewpoint and in exchanging experiences.

Technical Requirements

For our webinars, we use Cisco WebEx, one of the leading suppliers of online meetings.
At you can check if your system meets the necessary requirements for the participation at a WebEx meeting and at the same time install the necessary plug-in. Please just enter your name and email address for the test. If the installation is not possible because
of your rights for the computer system, please contact your IT department. WebEx is a standard nowadays and the necessary installation is fast and easy.


Day 1
09.00 – 10.15 h
Regulatory Requirements
  • ƒEU GMP Guideline Part I, II and III
  • ƒEU GMP Guideline Annex 15
  • ƒEMA “Shared Facilities Guideline” (incl. PDE concept)
  • ƒPIC/S PI 006
  • ƒAPIC Cleaning Validation Guideance for APIs
  • ƒPDA TR 29 – “Points to Consider for Cleaning Validation
  • ƒFDA 21 CFR 211.67
  • ƒFDA Guide to Inspection – Validation of Cleaning Processes
10.15 – 11.00 h
Practical pre-requisites I – Hygenic Equipment Design
  • ƒWhat is hygenic design?
  • ƒMaterial aspects
  • ƒWIP/CIP aspects
  • ƒRiboflavin test
11.00 – 11.30 h   Break
11.30 – 13.00 h
Practical pre-requisites II – Cleaning process development
  • Developing a cleaning process – which steps are necessary?
  • ƒTACT
  • ƒWhich residues are common
  • ƒType and selection of cleaners
  • ƒCIP vs WIP vs manual cleaning
  • ƒCleaning Documentation
13.00 – 14.00 h Break
14.00 – 14.30 h
Q & A
14.30 – 16.00 h
Cleaning validation – incl. practical approaches
  • Cleaning Validation Concepts
    • Bracketing
    • Hold time studies (DHT, CHT)
  • ƒCleaning Validation Risk Management
  • Cleaning Validation Plan
  • ƒCleaning Validation Report
  • ƒCleaning Validation life cycle (Revalidation, Ongoing
  • Cleaning Verification)
  • ƒCleaning Evaluation
14.00 – 14.30 h
Q & A
Day 2
09.00 – 10.10 h
Sampling during Cleaning Validation
  • Sampling during Cleaning Validation
  • ƒHow to define sampling points?
  • ƒSampling techniques
    • Swab
    • Rinse
    • Coupons
  • ƒAnalytical requirements
10.10 – 10.30 h   Break
10.30 – 11.45 h
Handling Deviations and OOS during Cleaning Validation and Ongoing Cleaning Verification
  • ƒWhat is an OOS, what a deviation regarding Cleaning Validation?
  • ƒGMP-compliant documentation of OOS and deviations
  • ƒCAPA
11.45 – 12.00 h Break
12.00 – 13.20 h
Special Topics of Cleaning Validation
  • Segregation & shared facility guideline
  • ƒCleaning Validation in Biologics & Biotech production
    • Differences between chemical and biotech APIs
    • Acceptance criteria for biotech APIs
    • Analytical methods to detect biotech APIs in Cleaning
13.20 – 13.45
Q & A

Go back

GMP Conferences by Topics

Cookies help us in providing our services. By using our services, you agree that we use cookies. Further information