Container-/Closure-Integrity Testing - Live Online Training

Thursday, 24 October 2024 9 .00 - 17.15 h

Course No. 20573

header-image

Speakers

Roland Koch

Roland Koch

Gasporox

Felix Krumbein

Felix Krumbein

Head ECA Visual Inspection Group

Dr. Martin Becker

Dr. Martin Becker

ECA Visual Inspection Group

Christof Langer

Christof Langer

OSConsulting

All times mentioned are CEST.

Objectives

Different products and different container types require different testing methods: this event aims at giving an overview of the different CCI testing systems which are applied during production and as part of the quality control system. Apart from technical aspects the regulatory requirements on CCI testing will be highlighted as well as the applicability of inline and offline testing.

Background

An intact container closure system, which is the sum of packaging components that protect the dosage form, is the pre-requisite for a safe and sterile drug product. The CC system protects the product from microbial contamination and also from exposure to gases or water vapour or the loss of solvent. Container Closure integrity testing is therefore a regulatory requirement and it is part of the whole life cycle of a sterile drug product.
 
Initially this testing was performed as part of the initial development of the packaging system and the system’s suitability verified in stability studies including on-going stability. Over the years, the expectation was raised to perform batch by Batch verification with latest trends to 100% inline or offline testing wherever possible.
 
We will discuss and answer questions like:
  • What are the current and upcoming GMP- and compendial requirements in the US / EU / RoW?
  • Will container closure integrity testing change to 100% inline testing?
  • What does the Annex 1 require?
  • How do we have to define’ tight’?
  • How to set up and defend a CCI control strategy
  • Which testing technologies are available and suitable?
  • CCI testing of vials
  • CCI testing of ampoules

Target Group

This conference is directed at specialists and executives from the areas engineering and production and QA dealing with the implementation and operation of systems for the container/closure-integrity testing of sterile medicinal products.

Technical Requirements

We use Webex for our live online training courses and webinars. At www.gmp-compliance.org/training/online-training-technical-information you will find all the information you need to participate in our events and you can check if your system meets the necessary requirements to participate. If the installation of browser extensions is not possible due to your rights in the IT system, please contact your IT department. Webex is a standard nowadays and the necessary installation is fast and easy.

Programme

Container-/Closure-Integrity Testing - Live Online Training

Seminar Programme as PDF

Container Closure Integrity Testing of Sterile Drug Products – Requirements, Expectations and Exaggerations
  • Container Closure Integrity during development, qualification and stability testing
  • Regulatory, Pharmacopoeial and GMP requirements
  • System integrity versus container damages
  • Patient risks – do we need batch by batch testing?
  • Industrial best practices
Overview of Container-/Closure-Integrity Testing Technologies
The presentation gives a complete overview of the different aspects of leak testing to do CCIT in the pharmaceutical production. The systems presented can be used for the CCIT of vials, ampoules, syringes, BFS, IV bags, blisters etc.
  • Leak, leak rate and the relevant physical Units
  • Leak test Methods
    • Pressure change methods (vacuum, pressure and LFC)
    • Head Space Analysis using TDLAS
    • Helium Leak Test and other Mass Spectroscopy Systems
    • High Voltage Leak Detection (HVLD)
    • Force Sensing Technology
  • Capabilities and examples of the different Methods
  • How to select the right method
  • How to generate positive controls
Proposal for a 100% CCI Qualification Concept
  • Regulatory requirements
  • CCI Methods
  • Composition and preparation of a qualification kit
  • Execution and evaluation of the qualification
100% inline CCI Testing of Ampoules
  • High Voltage inline testing: method description
  • Integration in the production process
  • Limits of the System
  • Qualification of the System
  • Validation
  • Routine Operation
Residual Seal Force (RSF) & Headspace (HAS) Testing of Vials
  • Setup of the testing System
  • Usage of HAS in product Validation
  • Statistical control by sampling RSF

ECA-Member*: € 990,-
Regular Fee*: € 1190,-
EU/GMP Inspectorates*: € 595,-
APIC Member Discount*: € 1090,-

(All prices excl. VAT). Important notes on sales tax.

* also payable by credit card
American Express Visa Mastercard

icon
Further dates on-site
Further dates on-site
Not available
icon
Further dates online
Further dates online
Not available
icon
Recording
Not available

Do you have any questions?

Please contact us:
Tel.: +49 6221 8444-0
E-Mail: info@gmp-compliance.org

Woman with headset

Go back

Testimonials about our courses and conferences

"Great material and speakers" and "Great speakers a lot of experience and sharing"

Felipe Gonzalez, Mucos Emulsionsgesellschaft mbH
Live Online Training - Granulation & Tableting, September 2024

"Nice presentations: easy understanding, quite visual"

Susana Manrique, Boehringer Ingelheim España, S.A,
Live Online Training - Granulation & Tableting, September 2024

“Fantastic course – I really enjoyed the interactive structure & greatly appreciate social activity.”

Anthony Cummins, Sebela Pharmaceuticals, Ireland
GMP Auditor Practice, September 2023

 

“Very well organized, information on point without being overwhelming.”

Eleni Kallinikou, Pharmathen
Live Online Trainng - Pharmaceutical Contracts - Febuary 2024

 

“Good overview of different types of agreements, good to see both the GMP and the legal angle”

Ann Michiels, Johnson&Johnson
Live Online Trainng - Pharmaceutical Contracts, Febuary 2024

 

 

“Well prepared presentations and good presenters. I also like the way of asking questions.”

Alexandra Weidler, Hookipa Biotech GmbH, Austria
Live Online Training – QP Education Course Module A, November 2023