Microbiology for Non-Microbiologists

Microbiology for Non-Microbiologists

Berlin, Germany

Course No 15195


Costs

This conference already took place.

If you have any questions, please contact us:
Tel.: +49 (0)6221 / 84 44 0 E-Mail: info@gmp-compliance.org

Speakers

Colin Booth, Colin Booth, QMS - Quality Microbiology Solutions, UK
Jörg Dressler, PMT
Arjan Langen, MSD, The Netherlands
Elaine Nichols, Thermo Fisher Scientific, UK

Objectives

It is the aim of this course to familiarise responsible personnel from production, quality assurance and engineering with microbiological questions. The participants learn how to interpret microbiological data and which consequences these have for the production.

Background

The quality of drugs and the quality assurance during production are above all determined by their microbiological characteristics. The microbiological requirements on drugs are laid down in various regulations. When an authority inspects a company, it will focus its attention on these and on the requirements made on hygiene.

In their daily work, the responsible personnel in the production units has to understand microbiological results and evaluate their significance for further decisions. However, in practice many microbiological results are misinterpreted and thus often the wrong conclusions are drawn from them. When asked for the most frequent misinterpretations of microbiological results, pharmaceutical microbiologists gave the following answers.

The difference between bioburden and sterility testing (are they the same?)
The use of disinfectants guarantees the sterility of the object, surface, culture treated.
The distribution of microorganisms in a sample or on a surface is uniform.
Motile microorganisms can swim hundreds of meters in an hour causing contamination problems in remote parts of the facility.
How can different media formulations give different results?
Microbial tests described in the Pharmacopoeias can always be validated, no matter what the matrix is, how aggressive it is, e.g. NaOH, how high the concentrations of antibiotics are etc.
Identification results are absolute and unequivocal, especially when computer-generated.
Underestimating the importance of cleaning prior to disinfection.
Environmental monitoring results provide an accurate risk assessment during production.
How can clean room surfaces not be heavily contaminated when the air counts are out of specification?
How can endotoxins be present when the bioburden is nil?
How can the titre of a virus reference standard change according to the detection cell line used?
WFI is sterile.
Filters are absolute.
UV light disinfects and is capable of sterilising surfaces and water.

This listing appears to cover all aspects of microbiology from the interpretation of straightforward issues concerning environmental monitoring, bioburden results and identifications – through to the more complex issues surrounding virology results for the biologics/biotech people.

The misinterpretation of microbiological results often gives rise to the following misunderstandings:
Huge environmental monitoring programmes (more is better).
Rejection of batches due to minor out-of- specification results.
Delayed registration objectives and to attend appeal hearings.
Numerous contamination incidents due to the application of inappropriate solutions to problems.
Senseless promises made to regulatory authorities without scientific rationale based on the concept of quality.

Target Group

This course is designed for responsible personnel from production, quality assurance, regulatory affairs and engineering that has to make judgements, release products and take actions on the basis of the microbiological data supplied.

Programme

The Characteristics of Microorganisms
Fungi
Bacteria
Mycoplasma
Viruses
Cellular organisation, function
Products; toxins, endotoxins, antibiotics, enzymes

Microbial Growth
How it occurs
What is required for growth?
Growth kinetics – laboratory culture versus nature
Effect of stress factors on growth

Microbial Identification Techniques
What is the significance of a name?
Distribution of microorganisms in nature,
raw materials and water
Distribution of microorganisms in pharmaceutical facilities

Detection Methods and Their Limitations
What can be detected by:
– The sterility test
– The bioburden test in its various forms. Membrane
filtration, pour plate, spread plate,MPN
– The test for specified organisms
– The endotoxin test
Limits of detection and factors effecting limits of detection
Validation of Microbial Test Methods
Basic principles of validating a microbial test system
What approaches can you take when a microbial assay test cannot be validated?

Cleaning, Sanitation, Disinfection
Why cleaning before disinfection?
The difference between cleaning and disinfection
Disinfectants and their efficacy
Methods of disinfection
Disinfection validation

Environmental Monitoring
Sampling techniques
– air sampling
– surfaces
– settle plates
Technical limitations and interpretation of results
Is there a relationship between high results and contaminated product?

How To Handle Microbiological OOS Results?
Typical Out-Of-Specification results
– Sterility testing
– Bioburden
– Endotoxin testing
– Cleanroom monitoring
Investigation of Causal Connection
– Laboratory failure investigations
– Sampling/process/production failure investigation
– Type of microorganisms
– Deviations/incidents/assessment
– Deviation/investigation report
Retesting/Reanalysis/Resampling
– Definitions
– Calculation of mean values
– Rejection/Release

Sterilisation Methods
Principles and kinetics of sterilisation
Selection of sterilisation method
Types of sterilisation methods
Validation of the sterilisation process

Workshops
The objective of these workshop sessions is to give the participants some hands on experience with the fundamentals of microbial techniques and the difficulties associated with interpretation. They will also provide the chance to discuss common problems in an informal atmosphere.

Workshop 1: Environmental Monitoring
Participants will take part in a hands-on particle monitoring, become acquainted with microbiological air samplers and learn about the most relevant microorganisms normally found in monitoring samples.
Special thanks to PMT – Partikel Meßtechnik GmbH for the support of that workshop.

Workshop 2:
Trouble shooting in the microbiological laboratory.
The focus will be on those problems that occur frequently in microbiological quality control. Practicable solution to these challenges will be discussed in small groups.

Go back

GMP Conferences by Topics

Cookies help us in providing our services. By using our services, you agree that we use cookies. Further information

OK