Handling of Foreign Particles in APIs

Handling of Foreign Particles in APIs

Prague, Czech Republic

Course No 15341


Costs

This conference already took place.

If you have any questions, please contact us:
Tel.: +49 (0)6221 / 84 44 0 E-Mail: info@gmp-compliance.org

Speakers

Nils Dickfeld, Meliscout, Germany

Dirk van Leemput, Janssen Pharmaceutica, Belgium

Christian Magin, Cilag, Switzerland

Dirk Overrödder, Cilag, Switzerland

Objectives

During this course all relevant aspects regarding the control of particles in APIs will be discussed. You will learn

  • How potential sources of insoluble matter can be identified
  • Which acceptance criteria for particles can be applied
  • How good practices to minimise the presence of particles in APIs can look like
  • What has to be considered regarding control of particles during plant and equipment maintenance and cleaning
  • How particles in Raw Materials and Packaging Materials can be minimised or avoided

Background

Visible particles, insoluble particles or matter or foreign particles in Active Pharmaceutical Ingredients (APIs) and related intermediates is a topic of great interest and importance to the pharmaceutical industry.

A number of inspectional observations from various Regulatory Authorities related to visible particles in Drug Products and APIs has risen considerable concern. Moreover inappropriate methods of investigation, controls and preventive and corrective actions were all subjects of citations by authorities and observations by API customers.

Particles have always been present in APIs but guidance from health authorities (EMA, FDA, others) or Pharmacopoeias (e.g. EP, USP) about particles in APIs is very limited. The APIC Guidance on Insoluble Matter and Foreign Particles in APIs is the only document so far providing guidance for a standard approach towards an appropriate control of foreign particles in APIs.

Target Group

This course is designed for all persons involved in the manufacture of APIs. In particular, the seminar will be of interest to personnel from Quality Assurance, Quality Control and production.

Programme

Particles and insoluble matter in API manufacturing: why is it a topic of great interest?

  • Definition of particles
  • Types of particles
  • Possible reasons for the elevated presence of visible particles
  • Hints in guidances on how to deal with visible particles
  • Inspectional observations
  • Expectations of API manufacturers, API users, API suppliers and supervisory authorities regarding visible particles in APIs
Analytical control methods for particle detection and identification
  • General conditions: design of an appropriate sampling process
  • Application of different inspection techniques: filter test, visual inspection etc.
  • Metal detectors, metal separators
  • Weighing and/or visual inspection of pieces of equipment
  • Periodic review of security sieves and/or filters
Incident management
  • Potential sources of insoluble matter
  • Root cause analysis – examples of investigation techniques and aids
  • Risk assessment: topics to be considered during the investigation/disposition decision
Acceptance criteria for particles in APIs
  • Types of dosage forms and routes of administration
  • Typical limits for particle size seen via a filter test
  • Proposal for limits
  • Typical construction materials in API manufacturing plants as source of particles
Case Study:
Automatic detection and removal of visible foreign particles in APIs


Good practices to minimise the presence of particles in API production – operational key preventive measures
  • Effective cleaning procedures
  • Pretreatment of equipment/product contact utilities
  • Inspection of equipment before and after production
  • Cleaning after repairs
  • Essential written procedures covering maintenance and cleaning procedures Environmental conditions during open handling in final stages of API manufacturing
  • Effective training of operators
Good practices to minimise the presence of particles in APIs – plant and equipment design and maintenance
  • Design of plant, process, and equipment
  • Selection of suitable construction materials
  • Preventive maintenance program for critical parts of equipment
Particles in Raw Materials and Packaging Materials
  • Potential particles in raw materials/packaging materials
  • Standard checks by QC
  • Qualification of raw materials suppliers
  • Communication with suppliers

Go back

GMP Conferences by Topics

Cookies help us in providing our services. By using our services, you agree that we use cookies. Further information

OK